Here you can find a complete list of test methods available with our equipment. Click on the name of the equipment to be redirected to the product page.
ISO International Organization for Standardization | ||
ISO 349 | Hard coal -- Audibert-Arnu dilatometer test | |
ISO 556 | Coke (greater than 20mm in size) - Determination of mechanical strength | |
ISO 3271 | Iron ores for blast furnace and direct reduction feedstocks -- Determination of the tumble and abrasion indices | |
ISO 4695 | Iron ores for blast furnace feedstocks -- Determination of the reducibility by the rate of reduction index | |
ISO 4696-1 | Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 1: Reduction with CO, CO2, H2 and N2 | |
ISO 4696-2 | Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 2:Reduction with CO and N2 | |
ISO 4698 | Iron ore pellets for blast furnace feedstocks -- Determination of the free-swelling index | |
ISO 4700 | Iron ore pellets for blast furnace and direct reduction feedstocks -- Determination of the crushing strength | |
ISO 7215 | Iron ores for blast furnace feedstocks-- Determination of the reducibility by the final degree of reduction index | |
ISO 7992 | Iron ores for blast furnace feedstocks -- Determination of reduction under load | |
ISO 8264 | Hard coal -- Determination of the swelling properties using a dilatometer | |
ISO 8371 | Iron ores for blast furnace feedstocks -- Determination of the decrepitation index | |
ISO 10329 | Coal -- Determination of plastic properties -- Constant-torque Gieseler plastometer method | |
ISO 11256 | Iron ore pellets for shaft direct-reduction feedstocks -- Determination of the clustering index | |
ISO 11257 | Iron ores for shaft direct-reduction feedstocks -- Determination of the low-temperature reduction-disintegration index and degree of metallization | |
ISO 11258 | Iron ores for shaft direct-reduction feedstocks -- Determination of the reducibility index, final degree of reduction and degree of metallization | |
ISO 13930 | Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by dynamic method | |
ISO 18894 | Coke -- Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) | |
ISO 23873 | Hard coal -- Method for the measurement of the swelling of hard coal using a dilatometer | |
DIN Deutsches Institut fur Normung | ||
DIN 51739 | Determining hard coal Dilatation | |
ASTM American Society for Testing and Materials | ||
ASTM E 279 | Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test | |
ASTM E 382 | Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets | |
ASTM D 2639 | Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer | |
ASTM D 3402 | Standard Test Method for Tumbler Test for Coke | |
ASTM D 5341 | Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) | |
ASTM D 5515 | Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer | |
| ||
IS Indian Standard | ||
IS 1354 | Methods of test for coke special test | |
IS 4023 Meth.B | Methods for determination of reactivity of coke | |
IS 6495 | Method of Tumbler Test for Iron Oxides: Lump Ores, Sinter and Pellets | |
IS 8167 | Determination of reducibility index of iron ore oxides, lump ores, sinter and pellets | |
IS 8624 | Method for determination of swelling index of iron ore pellets (mtd 13: ores and raw materials) | |
IS 8625 | Determination of crushing strength of iron ore pellets (MTD 13: ores and raw materials) | |
IS 10823 sect.1 | Determination of TDI and RDI of iron oxides, lump ores, sinter and pellets | |
IS 10823 sect.2 | Determination of TDI and RDI of iron oxides, lump ores, sinter and pellets | |
IS 11292 | Determination of relative reducibility of iron oxides: lump ore, sinter and pellets | |